This proximity-sensing, no-touch paper towel dispenser offers great convenience. It dispenses a pre-set length of towels per cycle from an 8' standard towel roll up to 800 ft. (244m) long and can use stub rolls for continuous dispensing. Powered by 4 D-size batteries (not included), it comes with a frame for semi-recessed mounting. When you place your hands in the sensor zone, it automatically dispenses one pre-set length of towel at a time until the supply runs out. You can set the towel length, delay, and economy settings using three three-position switches. It can handle full and partial rolls easily. Just unlock the door to refill the dispenser when it's empty or partially empty. You need to manually replenish the supply and replace the batteries. An LED indicator shows the sensing and battery status. The locking door prevents unauthorized access and roll removal.
Using this paper towel dispenser is easy. First, install 4 D-size batteries (not included) into the dispenser. Mount it semi-recessedly using the included frame. To set the towel length, delay, and economy, use the three three-position switches. When you need a towel, simply place your hands in the sensor zone, and it will dispense a pre-set length of towel. When the dispenser runs out of towels, unlock the door and replace the roll. If you have a partial roll, transfer it to the stub roll position and reload with a full roll. The dispenser will keep working properly. Remember to check the LED indicator regularly to know the battery and sensing status. Replace the batteries when the LED shows low battery. Keep the dispenser clean and dry to ensure its normal operation. Don't try to access the inside without permission as the door is locked to prevent unauthorized roll removal.
