Halsey Taylor Platinum Vinyl Push Button Water Cooler, 4.0

This Halsey Taylor water cooler is a great choice for both indoor and outdoor use. It's wall - mounted and features a push - button operation. With a 1 - level design, it offers a cold water capacity of 4 gph. The 1/8 HP compressor and 2.5 full - load amps ensure efficient operation. Measuring 24 - 1/2' in height, 18 - 1/8' in width, and 14 - 1/4' in depth, it has a 3/8' tube O.D. inlet. The platinum vinyl color gives it an elegant look. Operating at 115 volts with CFC - free 134A refrigerant, it keeps water at 50°F. The regulator maintains a constant stream height at line pressures from 20 to 105 psi. It comes with a 1 - 1/4' drain connection and an in - line strainer. It has a 5 - year warranty on the refrigeration system and a 1 - year warranty on electrical components, meeting NSF 61, NSF 372, UL399, and CAN/CSA 22.2 No. 120 standards.

Using this water cooler is easy. First, make sure it's properly installed on the wall. Connect the water inlet using the 3/8' tube O.D. and the drain using the 1 - 1/4' connection. Plug it into a 115 - volt power source. Then, just press the button to get cold water at 50°F. Remember, keep the area around the cooler clean to ensure good ventilation. Check the in - line strainer regularly and clean or replace it if it gets dirty. Every once in a while, wipe the exterior with a soft, damp cloth to keep the platinum vinyl looking nice. If you have any issues with the refrigeration system, it's covered by a 5 - year warranty, and for electrical components, it's a 1 - year warranty.