Product Detail
The ASI 3556 is a high - quality horizontal grab bar. It has a 1.5 - inch diameter and a sleek, smooth finish. Measuring 54 inches by 36 inches, this grab bar is crafted from 18 - gauge stainless steel tubing with an appealing satin finish. This finish not only reduces fingerprints but also gives the bar an attractive shine. At each end and the angle, there's a 3 - inch diameter flange made of type - 304, 11 - gauge stainless steel, securely welded to the tubing. Inside each flange, there are three 7/32 - inch diameter countersunk, predrilled holes. These holes, placed about every 120 degrees, are designed to accept No. 10 self - tapping or oval head mounting screws (not included). Once installed, the mounting hardware remains visible. This grab bar fully meets or exceeds all ADA requirements for grab bars.
Using the ASI 3556 grab bar is easy. First, gather the No. 10 self - tapping or oval head mounting screws (not included). Find a suitable location on the wall where you need support. Place the grab bar at the desired spot and align the holes on the flanges with the wall. Insert the screws through the holes and tighten them to secure the bar. Remember, since the mounting hardware is exposed, make sure the installation looks neat. As for maintenance, simply wipe the grab bar with a soft, damp cloth regularly to keep it clean and free from fingerprints. Avoid using abrasive cleaners as they can damage the satin finish. If you notice any loose screws over time, tighten them immediately to ensure the grab bar remains secure and safe to use.
