Bradley 2903-28 Automatic High Efficiency Hand Dryer, 110-120 Volt, Surface-Mounted, Cast Iron

The Bradley Aerix Hand Dryer is crafted from 1/4 - inch thick one - piece cast iron, coated with white porcelain enamel. It features automatic activation via an electronic infrared detection sensor, which is adjustable with a maximum two - second switch - off delay. The cover is fixed to the base plate with two vandal - proof lock screws and can be locked using a special key wrench. The fixed nozzle is chrome - plated zamac. It's protected by a 4 - amp fuse and has sealed self - lubricated ball bearings. The aluminum centrifugal turbine has a double symmetrical inlet, and the scroll fan is made of fireproof plastic UL 94 - VO. There's an undulated NiCr heating element with a safety thermostat. The 1/8 - inch thick aluminum base plate has four 5/16 - inch holes for wall mounting. It operates at 110 - 120V and offers a 29 - second drying time. It's surface - mounted and not ADA compliant.

Using this hand dryer is easy. Just place your hands under the dryer, and the automatic infrared sensor will detect them and start the drying process. The drying time is about 29 seconds, and you can adjust the sensor according to your needs. There's a maximum two - second delay after you remove your hands before it switches off. When installing, use the four 5/16 - inch holes on the 1/8 - inch thick aluminum base plate to mount it on the wall. Since it's not ADA compliant, make sure it's installed in an appropriate area. To maintain it, periodically check the 4 - amp fuse. If the dryer doesn't work, the fuse might need replacement. Also, keep the dryer clean, especially the nozzle and the sensor area, to ensure optimal performance.