ASI 0390-41 EZ-Fill Multi-Feed Kit - Vanity Mounted Fill Port, 5 L under vanity tank with tubing - Dispenser Not Included - Matte Black

The ASI 0390 - 41 EZ Fill™ Soap Dispensing Multifeed Kit can serve up to 6 units. It comes with a 6 - liter container, a top - fill tube, and a matte black finish counter fill port with a cover. The EZ Fill multi - feed tank is made of leak - proof, seamless molded translucent plastic. You can place it under the counter on the base cabinet floor or in the provided wall - mounting bracket. The tank connects to the under - counter soap distribution tubing (supplied with separately specified soap dispensers) and the EZ Fill top - fill port's flexible fiber - reinforced soap fill hose with a single coupling. Unused soap distribution ports should be closed with the provided blanking fittings. The EZ Fill top - fill port and cover have a highly polished chrome - plated finish on all exposed surfaces, and the flange has an O - ring to seal against the vanity top, preventing liquid from leaking through the countertop. Recommended soaps are clear liquid soaps without abrasives. Liquid soaps should have a pH range of 5.5 - 8.5 and a viscosity range of 100 - 3800 mPas - cP. Liquid foaming soaps should have a pH range of 5.5 - 8.5 and a maximum viscosity of 100 cP.

Using this ASI EZ Fill multi - feed kit is easy. First, decide where to place the 5 - liter under - vanity tank. You can put it on the floor of the base cabinet under the counter or use the provided wall - mounting bracket. Then, connect the tank to the under - counter soap distribution tubing that comes with your separately specified soap dispensers. Also, attach the EZ Fill top - fill port's flexible fiber - reinforced soap fill hose to the tank with the single coupling. When filling the tank, use a clear liquid soap without abrasives. Make sure the soap's pH is between 5.5 and 8.5. For liquid soaps, the viscosity should be between 100 and 3800 mPas - cP, and for liquid foaming soaps, the maximum viscosity should be 100 cP. If there are any unused soap distribution ports, close them with the provided blanking fittings. To keep your kit in good condition, regularly check the connections for any leaks. Clean the top - fill port and cover with a soft cloth to maintain the chrome - plated finish. The O - ring on the flange should also be inspected for damage, as it helps prevent liquid from leaking through the countertop.