The ASI 1224-C18 stainless steel heavy-duty shower curtain rod support is a top - notch choice for commercial washrooms in hotels or hospitals. It pairs perfectly with all ASI 1 - inch diameter shower curtain rods that are 72 inches or longer. This ceiling - mounted support adds extra stability to the curtain rod, guaranteeing a secure installation. The unit is made up of a flat exposed mounting flange, tubing, and a sleeve. It's constructed using all - welded design and 18 - 8 alloy stainless steel. The flange has a 3 - inch diameter and is 1/8 inch thick, with three countersunk holes for 1/4 - inch screws (sold separately). The 20 - gauge stainless steel tubing has a 1 - inch diameter. The sleeve locks the support firmly in place with a setscrew.
Using the ASI 1224 - C18 shower curtain rod support is easy. First, find a suitable spot on the ceiling above your shower curtain rod. Then, use the three countersunk holes in the 3 - inch diameter flange to attach it to the ceiling with 1/4 - inch screws (which you'll need to buy separately). Next, connect the 1 - inch diameter tubing to the flange. After that, slide the sleeve over the tubing and use the setscrew to lock it firmly. Make sure the rod is 72 inches or longer and 1 - inch in diameter to fit this support. For maintenance, simply wipe it down with a soft, damp cloth every now and then to keep it looking good. Avoid using abrasive cleaners as they can scratch the stainless steel surface. Also, check the screws and setscrew periodically to ensure they're tight and the support remains stable.
