ASI 0032 Commercial Toilet Paper Dispenser, Partition-Mounted, Stainless Steel w/ Satin Finish

The ASI 0032 Twin Hide - A - Roll Toilet Paper Dispenser is a great solution for bathrooms. It can supply toilet tissue to both sides of a 2 - 1/2 - inch - thick partition in a bathroom stall. For installation, you need a rough opening that's 11 - 7/8 inches wide and 12 - 1/4 inches high. After installation, it provides toilet tissue on the right in each stall and can hold two standard rolls up to 5 - 1/4 inches in diameter. The four rollers are made of high - impact - resistant plastic with plated steel endpins. Its design keeps one roll accessible while hiding the other behind a type - 304, 18 - gauge stainless steel door. When the bottom roll runs out, the top roll drops automatically. The spindles can't be removed until empty to prevent theft.

Using this ASI 0032 toilet paper dispenser is easy. First, make sure you have a 11 - 7/8 inches by 12 - 1/4 inches rough opening in the 2 - 1/2 - inch - thick partition for installation. Once it's installed, load two standard rolls of toilet paper up to 5 - 1/4 inches in diameter. One roll will be accessible, and the other is hidden. When the accessible roll is used up, the hidden roll will drop down automatically. As for maintenance, keep the dispenser clean with a soft cloth. Avoid using abrasive cleaners that might damage the satin - finished stainless steel. Also, don't try to remove the spindles until they are empty to prevent theft and keep the dispenser working properly.