This non - returnable Verge Soap Dispenser from the Metro Series is a great addition to any space. It features a Multi - Feed (Shared Tank, Top Fill Port) system. You'll need to buy the “6 - SOAP - MFT” Soap Multi - Feed Tank separately. If you prefer a Single (Top Fill at Spout) Fill System, look for the part number with a “T” for Top Fill instead of “M” for Multi - Feed.
This dispenser pairs perfectly with the Verge Faucet model S53 - 3300 in Brushed Stainless Steel. It comes with a Multi - Feed Tank Assembly system and a 166.5 oz soap tank that can support up to 6 dispensers through a fill port hub on the deck's top. It works well with liquid soap having a viscosity between 100 cps and 5000 cps.
The touch - free dual sensor activation is designed to avoid false activations. It has a refined, cylindrical design made of chrome - plated cast brass with a stock Brushed Stainless Steel PVD finish. You can choose the power supply separately, either a Battery pack (4xAA alkaline) or an A/C Adapter. There's an indicator light at the spout's base to show power, activation, and low soap levels. It has a vandal - resistant construction with an anti - rotational gasket/washer. It complies with ADA guidelines and has UL and CE certified electrical components, as well as being certified under ADA / ICC ANSI 117.1, Citation 309.4.
Model details: 6 - 3300 stands for Verge Deck - Mounted Soap Dispenser in the Metro Series. 'R' means Infrared Sensor Operation for activation, 'L' indicates Liquid soap type, 'M' is for the Multi - Feed fill system, and 'BS' represents the Brushed Stainless finish.
Using this soap dispenser is easy. First, make sure you've installed the power supply, either the battery pack (4xAA alkaline) or the A/C Adapter. Then, if you're using the Multi - Feed system, install the “6 - SOAP - MFT” Soap Multi - Feed Tank. Pour liquid soap with a viscosity between 100 cps and 5000 cps into the tank. When you place your hands under the spout, the touch - free dual sensors will detect your hands and dispense soap.
Here are some important things to note. This is a non - returnable item, so choose carefully. If you want a Single Fill System, select the part number with a “T”. Also, keep an eye on the indicator light at the base of the spout. It will tell you if the dispenser is powered, if it's working (activation), and when the soap is running low.
For maintenance, regularly check the anti - rotational gasket/washer to make sure it's in good condition. Wipe the dispenser with a soft, damp cloth to keep it clean. If there are any issues, since it has UL and CE certified electrical components, you can refer to the relevant safety guidelines or contact the manufacturer.
