Bradley (6-3500) RLM-BN Touchless Counter Mounted Sensor Soap Dispenser, Brushed Nickel, Linea Series

This is a non - returnable item. It features a Multi - Feed (Shared Tank, Top Fill Port) system. You'll need to buy the “6 - SOAP - MFT” Soap Multi - Feed Tank separately. If you prefer a Single (Top Fill at Spout) Fill System, look for an equivalent part number with a “T” for Top Fill instead of “M” for Multi - Feed. The Verge Soap Dispenser from the Linea Series pairs well with the Verge Faucet model S53 - 3500 in Brushed Nickel. It's part of a Multi - Feed Tank Assembly with a 166.5 oz soap tank that can support up to 6 dispensers through a fill port hub on the deck top. Compatible with liquid soap having a viscosity range from 100 cps to 5000 cps. The touch - free dual sensor activation is optimized to prevent false activations. It has sleek lines and a curved edge design, made of chrome - plated cast brass with a stock Brushed Nickel PVD finish. You can choose the power supply separately, either a Battery pack (4xAA alkaline) or an A/C Adapter. There's an indicator light at the spout base to show power, activation, and low soap levels. It has a vandal - resistant construction with an anti - rotational gasket/washer, complies with ADA guidelines, and has UL and CE certified electrical components, as well as ADA / ICC ANSI 117.1 certification (Citation 309.4).

Using this soap dispenser is easy. First, if you're using the Multi - Feed system, make sure you've bought the “6 - SOAP - MFT” Soap Multi - Feed Tank and installed it properly. Place your hand under the spout, and the touch - free dual sensors will activate to dispense soap. You can choose to power it with either a Battery pack (4xAA alkaline) or an A/C Adapter. The indicator light at the base of the spout will tell you if it's powered, when it's dispensing soap, and when the soap is running low. Remember, this is a non - returnable item. For maintenance, keep the dispenser clean by wiping it with a soft cloth regularly. Check the anti - rotational gasket/washer periodically to ensure it's in good condition. Since it complies with ADA guidelines, use it in accordance with those regulations. And because the electrical components are UL and CE certified, make sure to follow basic electrical safety rules.