Bobrick B-4221 Commercial Toilet Seat Cover Dispenser, Surface-Mounted, Stainless Steel

Bobrick ConturaSeries toilet seat cover dispenser is crafted from satin-finish stainless steel. It can dispense 250 single- or half-fold toilet seat covers or one box. The dispenser fills from the bottom. Its dimensions are 15 3/4' W, 11' H, 2' D (400 x 280 x 50mm). A minimum clearance of 5' (125mm) from the bottom of the dispenser to the top of any horizontal projection is required for filling. Made of 18-8, type-304, 20-gauge (1.0mm) stainless steel with a satin finish, it has a drawn, one-piece, seamless construction. The front of the dispenser matches other Bobrick ConturaSeries washroom accessories in arc degree and corner radius. It holds single- or half-fold paper toilet-seat covers and has a capacity of 500. Installation is on the wall or partition of the toilet compartment with two screws (not included). Different wall types need appropriate fasteners. The dispenser meets the specification of type-304, 20-gauge (0.9mm) stainless steel with a satin finish, matching other ConturaSeries items in the washroom.

Using this toilet seat cover dispenser is easy. First, make sure there is at least 5 inches (125mm) of clearance from the bottom of the dispenser to the top of any horizontal projection. Then, fill the dispenser from the bottom through the concealed opening with single- or half-fold paper toilet seat covers. It can hold up to 500 seat covers. When installing, use two screws (not provided) to mount it on the wall or partition of the toilet compartment. For plaster or dry - wall, use concealed backing and #8 x 1 - 1/2 inches (4.2 x 38mm) sheet - metal screws. For other wall surfaces, you can use fiber plugs, expansion shields, 1/8 inches (3mm) toggle bolts or expansion bolts. To maintain it, simply wipe the satin - finish stainless steel surface regularly with a soft cloth to keep it clean and shiny. Avoid using abrasive cleaners that could scratch the surface.